20 Best electrician tools

The job of a licensed electrician is to ensure the safety and efficiency of any structure or electrical connection. Electricians are required to be licensed in all fifty states in order to legally conduct work. In order to be qualified for the electrician licensing exam, an applicant must pass a written examination as well as a test given by a state board of licensing. While the electrician tools and supplies list is quite extensive, electricians licensed by an employer generally do not provide the more expensive commercial power tools or high-powered equipment found on many job sites.

Klein Tools 80028 Electrician Hand Tools Set - 28 Piece, Pliers, Screwdrivers, Nut Drivers, Wrenches, More
  • 28 piece tool set with high quality commonly used hand tools for the electrician
  • Tool Kit includes: 4 types of pliers, 8 screwdrivers, 7 nut drivers, adjustable wrench, power-return ruler, torpedo level, crimper/cutting tool, wire stripper/cutter, utility knife, canvas zipper bag, 16-Inch canvas tool bag and protective eyewear
  • Includes a canvas zipper bag and a 16-Inch (406 mm) canvas tool bag
  • Bag is constructed with heavy-duty natural canvas and steel-frame mouth with hinge for rugged use and has two straps with buckles provide secure closure
  • Moisture-resistant, vinyl bottom and lower sides with non-scratch studs on base
BOOHER 0200101 10-Piece 1000V Insulated Electrician's Tool Set
  • Each tool is tested to a voltage of 10,000 VAC and certified to 1,000 VAC
  • Each Insulated tool has passed 2 times 10,000VAC test to ensure safety, obtained GS/VDE certificate
  • Insulated Pliers use CR-V steel
  • Insulated screwdriver use S2 steel. S2 steel with heat treatment, high hardness and good toughness and resistence
  • Special insulated material with anti-burn and high-low temperature resistance
Hi-Spec 8 Piece Insulated Electrician Tool Set – 1000V VDE Approved Pliers, Slotted & Phillips Screwdrivers with S2 Steel Tips, Voltage Tester & Electrical Tape for DIY Electrics
  • ELECTRICAL TOOL KIT: For the DIY electrician looking for comprehensive cover and protection in electrical tasks, this insulated screwdriver and pliers set of VDE tested tools will ensure you stay prepared for tasks involving electrical wires and currents in and around the home, office and even job site
  • VDE TESTED TOOLS: Tools are VDE and GS standard tested with thick, insulated handles so you can work with piece of mind with protection of up to 1000 Volts – great for serious craft, engineering and electrical mechanic work
  • GREAT TO USE: Soft, wide, co-molded grips are great to hold and allow for additional pressure when required. Safety guards prevent hands from slipping during work so you can maintain total control
  • VOLTAGE TESTER & ELECTRICAL TAPE: The necessary accessories to allow for maximum safety and professional results every time – a voltage tester (Range 125-250V) checks for live wires as well as leaks and electrical tape (red) ensures a safe seal when work is complete
  • SET INCLUDES: 4 Screwdrivers (PH1,PH2, Slotted 0.4,0.8mm) , Diagonal Pliers, Needle-Nose Pliers, Electrical Tape and a voltage tester. Tools comes in compact and portable zipper case that keeps them safe, organised and ready for when you need them
Discount !!!
1000V Insulated Electrician Screwdriver Set, All-in-One Premium Professional 13-Pieces CR-V Magnetic Phillips Slotted Pozidriv Torx Screwdriver
  • ✅HURRICANE 1000V Insulated Electrician Screwdriver Set CR-V 13 Piece Magnetic Phillips Slotted Pozidriv Torx
  • ✅CERT: VDE and GS certified guarantee safe working standards of 1000 Volts
  • ✅PREMIUM MATERIAL: Made by Chrome vanadium steel durable
  • ✅HARDENING MAGNETIC TIPS: Screwdriver tips all have Hardening treatment and Manganese phosphate surface treatment
  • ✅INDUSTRIAL LEVEL QUALITY: Industrial level quality can use for Professional work Home DIY Insulated and no-slip handle comfortable for use
Klein Tools 57060 Master Electrician's Torque Kit 25-Piece
  • One 7/16-Inch internal hex drive micrometer-adjustable torque wrench. Torque range: 200-1200 inch-pound (22.6-135.6 Nm) with 10 inch-pound incremements (1.1 Nm)
  • One 7/16-Inch internal hex drive micrometer-adjustable torque wrench. Torque range: 40-200 inch-pound (4.5-22.6 Nm) in 2 inch-pound (0.2 Nm) increments
  • Ten 7/16-Inch wrench bits. Sizes: 1/8-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, 9/16-Inch, hex to square
  • Two 7/16-Inch hex-wrench extensions. Sizes: 4-Inch (102 mm); 7-Inch (178 mm)
  • One 7/16-Inch female hex-wrench adapter (Coupler). Couples wrench bit to extension
CARTMAN Tool Set 168Pcs Orange General Household Hand Tool Kit with Plastic Toolbox Electricians Tools in Storage Case
  • Unisex 168-Piece Hand Tools Kit - Ideal for home and garage repairs
  • Heat treated and chrome plated to resist corrosion
  • Securely housed in a handy blow molded case
  • All tools meet or exceed ANSI critical standards
  • Contains the tools needed for most small repairs around the house
Occidental Leather 5500 Electrician's Tool Pouch
  • Pockets for screw drivers and specialized tools
  • Chain for electrical tape
  • Loop for flashlight
  • Quick release tool snap
  • Heavy duty hammer holder
Kani Tool Backpack, Large Capacity Waterproof Electrician Tool Bag, Multi-purpose Worksite Tool Backpack with Padded Back Support for Contractor, Electrician, Plumber, Cable Repairman (B - Black)
  • Durable Tool Organizer Backpack: Our tool backpack is made of durable oxford material with waterproof coating to keep tools far away from water, mud or snow, you can be sure that your tools remain safe and dry; Reinforced pockets and shoulder straps to allowing your hands free to carry devices.
  • Perfect Design: 12.6” x16.5” x7”(32*42*18cm) with internal universal tools pockets and zipper pockets to meet your different needs. To ensure a comfortable fit, the tool backpack provides padded back support and shoulder straps. If you need to organize your tools and transport them from site to site, this is the tool bag for you.
  • Large Capacity and Multi-Function Tool Organizer: Our backpack has plenty of room to hold your screwdrivers, wrenches, measuring tape, level, drill, electrical fish tape, electronics, sockets and other hand tools. Organized all of your tools in one convenient place, Compatible with Klein Tools, Hvac Tools, CLC Tools. Protecting your tools and make you use tools & small accessories more quick and easy.
  • Perfect Tool Backpack Gift For Men and Women: A perfect gift ideal for contractor, carpenter, plumber, framer, Craftwork Handymen Repairmen, Electrician, HVAC Plumber, Mechanic, cable & audio visual installer. Suitable for maintenance, installation, fitment project, water conservancy, home improvement, woodworking or other repair project.
  • After-Sales Service: If you have any questions or dissatisfaction after receiving the product, please feel free to contact us. Our after-sales team will sincerely solve the problem for you.
Occidental Leather 9596 Adjust-to-Fit Pro Electrician Tool Belt Set Bundle w/ 5055 Stronghold Suspension System (2 Pieces)
  • Bundle Includes: (1) Occidental Leather 9596 and (1) Occidental Leather 5055
  • Top of the line all leather bag Adjust-to-Fit set for the commercial electrician
  • Efficient, hand specific tool and fastener organization, function engineered
  • Tool holders form to your tools and give years of durable service
  • One size fits all suspenders for even load distribution
BOULDER BAG 104 Electrician's Comfort Combo Tool Belt with Leather Belt Buckle, Heavy Duty Work Belt, Black, (Large 36-40 Inch Waist), Made in USA
  • 25 POCKETS/SLOTS: One-piece Boxed Bottom Design, Thick Webbing Strengthens and Holds Pockets Open for easy access
  • ERGONOMIC DESIGN: With Superior Sturdy Material: WATERPROOF: Double Layered Military Grade 1000 Denier Nylon. Abrasion and Tear Resistant
  • LIGHTWEIGHT, VERSATILE and DURABLE: Electrician Tool Belt w/double Locking Rivets, MADE IN THE USA
  • MAXIMUM COMFORT: Comfortable High Density Closed Cell Foam: Keeps a Belt Full of Tools from Rubbing You the Wrong Way. The Foam backing we use is ultra-breathable material for comfort and to keep you cool
  • BUILT ROCK SOLID: 20+ Years Building Tool Belts for Professionals: Highest satisfaction from customers. This Belt is Specifically Designed for Electricians
Amazon Basics Durable, Wear-Resistant Base, Tool Bag with Strap, Electrician's, 50 Pocket
  • Electrician’s tool bag with 50 pockets (41 internal and 9 external); keeps tools upright for easy viewing and quick access (tools not included)
  • Durable non-collapsing design with an internal metal frame and a wide, open mouth
  • Made of tough, black, 600D Oxford cloth and gray 1680D material; heavy-duty stitching, overstitched stress points, and sturdy zipper
  • Abrasion-resistant base with 4 rubber-foam feet; padded adjustable shoulder strap and 2-strap handle for carrying
  • Bag Dimensions: 20 x 9.5 x 14 inches.
Discount !!!
DEWALT DG5103 Small Durable Maintenance and Electrician's Pouch with Pockets for Tools, Flashlight, Keys
  • CONVENIENT ACCESS: This tool pouch contatins a large main pocket and smaller front pocket for parts and tools.
  • MULTIPLE STORAGE OPTIONS: Web loops and sleeve pockets on this tool pouch allow you to carry a variety of tools and parts.
  • DURABLE TOOL POUCH: This rable tool pouch is made with ballistic poly fabric and reinforced edges for extended use and wear.
  • HOLDS YOUR ESSENTIALS: This tool pouch can hold a flashlight or large tool sleeve and electrical tape strap, plus carabiner for keys
  • TWO CONNECTION OPTIONS: This tool pouch can be attached with a rear clip or can be attached to a belt up to 2-3/4-Inch wide
Klein Tools 32807MAG 7-in-1 Nut Driver, Magnetic Driver with SAE Hex Nut Sizes and Spring Coil Bits, Heavy-Duty Handle for Added Torque , Black
4,866 Reviews
Klein Tools 32807MAG 7-in-1 Nut Driver, Magnetic Driver with SAE Hex Nut Sizes and Spring Coil Bits, Heavy-Duty Handle for Added Torque , Black
  • This Klein Screwdriver / Nut Driver allows for one-handed driving, with seven sizes in one tool
  • Strong, rare earth magnets (1/4-Inch, 5/16-Inch, 11/32-Inch, 3/8-Inch, 1/2-Inch) securely hold nuts and bolts
  • Spring coil (7/16-Inch, 9/16-Inch) holds nuts and bolts in place without the use of magnets
  • Hollow shafts (1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 9/16-Inch) for driving nuts deep onto bolts or threaded rod
  • Heavy-duty handle and shaft exceed the torque performance of regular nut drivers
Occidental Leather 5589 Electrician's Tool Case
420 Reviews
Occidental Leather 5589 Electrician's Tool Case
  • All leather belt worn commercial electricians case with 25 pockets and tool holders that accommodate all your tools
  • Includes heavy duty chain for electrical tape and a handy utility clip
  • Designed exclusively for use by journeyman electricians
  • Made in USA
Klein Tools 94130 1000V Insulated Screwdriver Tool Set with #2 Phillips and 1/4-Inch Cabinet Slim Tips, 2 Pliers and Wire Stripper
  • 5-Piece kit includes essential 1000V rated insulated tools including pliers (2), wire stripper and screwdrivers (2)
  • All tools meet or exceed ASTM F1505 and IEC 60900 standards for insulated tools
  • Three-part insulation with underlayer on the pliers and wire stripper provides warning sign that insulation may be compromised. VDE Certified
  • Pliers feature induction hardened cutting knives
  • Slim tip #2 Phillips and 1/4-Inch Cabinet tip screwdrivers allow for greater access into tight spaces
BOULDER BAG Ultimate Comfort Combo 100 Electrician Tool Belt with Quick Release Buckle, Heavy Duty Work Belt, Black, (Extra-Large 41-44 Inch Waist), Made in USA
  • 32 POCKETS/SLOTS: One-piece Boxed Bottom Design, Thick Webbing Strengthens and Holds Pockets Open for easy access
  • ERGONOMIC DESIGN: With Superior Sturdy Material: WATERPROOF: Double Layered Military Grade 1000 Denier Nylon. Abrasion and Tear Resistant
  • LIGHTWEIGHT, VERSATILE and DURABLE: Electrician Tool Belt w/double Locking Rivets, MADE IN THE USA
  • MAXIMUM COMFORT: Comfortable High Density Closed Cell Foam: Keeps a Belt Full of Tools from Rubbing You the Wrong Way. The Foam backing we use is ultra-breathable material for comfort and to keep you cool
  • BUILT ROCK SOLID: 20+ Years Building Tool Belts for Professionals: Highest satisfaction from customers. This Belt is Specifically Designed for Electricians
Discount !!!
TradeGear PART#SZA Electrician's Belt & Bag Combo - Heavy Duty Electricians Tool Belt Designed for Maximum Comfort & Durability - Ideal for All Electricians Tools - Fits Sizes S - L (26"-40")
  • MADE FOR CARRYING ALL YOUR MOST-USED TOOLS: 27 new and improved spacious pockets, 2 heavy duty pouches, 4x suspender-to-belt attachment loops, D-ring attachments and more make this work belt capable of carrying your wrenches, pliers, grips, hammers, markers, and more tools.
  • COMFORTABLE ENOUGH FOR THE MOST DEMANDING JOBS: An ergonomic design coupled with a high-density, air-mesh foam padding delivers unbelievable comfort. This is the best electricians tool belt for jobs that require you to work long hours carrying heavy tools.
  • EXTRA HEAVY-DUTY CONSTRUCTION: The heavy duty 600D nylon material used to make this tool belt for electricians is well capable of years of service. We used double layers reinforced with metal rivets and bar-tak stitching for an even longer service life. It is a combo tool belt made for serious electricians.
  • EASY TO CARRY AND WEAR: Easy carry handles on this heavy-duty work tool pouch add great convenience. They make it easier to wear, take off, or even move around your belt even when fully loaded. You can also make adjustments by folding over the velcro for a better, more comfortable fit.
  • COMPLETE SATISFACTION OR YOUR MONEY BACK: Your satisfaction is our #1 priority. If there’s any issue with your electrician’s tool belt, let us know. We will replace it or refund it, no questions asked. The work belt also makes a great gift for men on a special occasion. Click ‘Add to Cart’ now!
Klein Tools 92906 Tool Set, Basic Tool Kit has Klein Tools Hand Tools for Apprentice or Home: Pliers, Wire Stripper / Cutter, Screwdrivers, 6-Piece
  • 6-piece tool set is perfect for the professional, apprentice worker, or do-it-yourselfer
  • Tool Kit with 9-Inch High-Leverage Lineman's Pliers that feature a rivet closer to the cutting edge for 46-Percent more cutting and gripping power
  • Angled-Head Diagonal-Cutters feature short jaws and beveled cutting edges permit close cutting of wire
  • Wire stripper is compact, lightweight and designed to cut 10-18 AWG solid wire
  • 8-Inch Long Nose Pliers with extended handles provide added reach and leverage
Autoly Multipurpose Electricians Tool Pouch Waist Bag with Belt Oxford Cloth Tool Holder Organizer for Flashlight, Hammer, Pliers, Screwdriver, Tape
  • Tool Waist Bag Overall Size: 600 x 160 x 40mm / 23.62" x 6.3" x 1.57" (L*W*H); Main Color: Black
  • Made of high quality Oxford Coth,oxford tool bag are waterproof,dampproof,wear-resistant,durable for use
  • Variety pockets for use:1 pocket interior,6 different size pocket exterior,can meet the normal requestment for carry tool
  • Convenient Belt Snap Design:The belt are flexable and adjustable,can fit most of waistline,and the belt width has 37mm,can reduce the press during use
  • Modern Tool Pouch are suitable for electrician,technician,maintenance professional use,it can help for wear multiple tools during working,and also very convenient to take the tool in the bag,provide work efficiency and bring convenience

An Introduction To Electrician Tools

Often, electrician tools and supplies consist of a basic assortment of basic tools: a jigsaw, hammer, screwdriver, tape measure, level, pliers, cable cutters, and a small assortment of hand tools. These tools are often used for repairing basic electrical connections or for installing fuses or light bulbs. But there are a number of other uses as well, some of which will be described below. Often, this will include an explanation of why you would need one particular tool.

The first type of electrical tools we will discuss are the “high-quality” electrician tools, including electrician’s power tools, pouch electrician tools, and electrical tool kits. A high-quality electrician’s power tool kit includes at least one pouch that contains at least three blades and one head. A quality electrical tool kit also should contain one or more extension heads. It is recommended that the user carry more than one tool in the form of a pouch and an electrician’s power tool.

Electrical conduit: There are a wide variety of electrical wire sheaths available, ranging from copper tube to rubber tubing and insulated wire. Some are standard and some come pre-assembled, but many are sold as complete kits with all of the parts, wiring and conduit already attached. This is the most expensive of the different tools. If you choose to assemble it yourself, make sure you buy the right type of electrical cable sheath for your purposes. Not all conduit is safe to work with, especially when it comes to using electrical wire with exposed wire strands.

Pliers: Among the most important tools you need to have at your fingertips are pliers, which are also often referred to as scissors. Pliers can do a lot of different things, including pulling, twisting and piercing. Many pliers are also long-handled, which makes them easier to work with. You can buy pliers of varying sizes and handle. For example, if you need to do work with very small nails or bolts, you might consider buying a pair of long-handled pliers that provide leverage and can get into really tight places.

Channellock wrench set: A channellock is a strong tool that is primarily used for securing metal conduit or wires in tight spaces. These types of pliers have different sizes and designs, so you will have the best possible choice available to you. There are basic versions that come in different sizes with one blade, and there are also larger versions that have multiple blades and can do a lot of torque. No matter what the size of the channelock you use, make sure it has a heavy-duty belt so that you can use it for a long time.

Electrician’s tool kits: There are a lot of electrician’s tool kits available that you can buy, but there are two things you should look for when buying one. One is to check if it comes with a pouch. A pouch adds an extra safety feature to a tool kit because you can easily carry the pouch around with you while working. Another important thing to check is whether the pouch comes with both hands, as you might want to test out the pliers or other tools on the workbench while you’re trying to close the pouch with your left hand.

Electrical tool kits for sale are usually priced at lower prices so you can easily get more than what you need. The following are the most common tools that you can find in a Milwaukee electrical tool kit: wrenches, socket wrenches, electrician’s knife, awl, pliers, cable cutters, screwdrivers, sockets and washers, electrician’s tape, electrician’s pencil, wire strippers, cable couplings, and shrink wrap. All these tools can easily be purchased from a Milwaukee tool dealer or from several retail stores in Milwaukee. In case you need other tools, all you need to do is visit some retail stores in Milwaukee and ask the sales representatives for the tools you need.